Boat Service

Boat Maintenance

Using SX50: Where and How?

 Just being on or near the water allows salt to build-up on the surfaces of your boat. SX50 is quite useful in helping to get the salt away from surfaces in your cabin and around areas where washing with Buster50 is not possible.

Make up a small bucket of SX50 at 35:1 mixed with water ( Salt water can be used but double the ratio 17:1) and using a cloth soaked (squeeze out the excess) in the solution proceed to wipe down any and all metal surfaces and fittings throughout your cabin.

The surface can be left to dry and the salt is removed. If you wish to polish up the fittings use a soft dry cloth or a micro fibre cleaner.

Removing Salt Buildup from under Cowling  SX50 will remove salt buildup from under your Outboard or Inboard Cowling easily with little fuss and NO oily or greasy buildup. Mix SX50 with water (filtered water is better if available) at 35:1 in a pump pressure sprayer or trigger spray bottle. Start at the top and work your way down the engine block wetting well with SX50 solution. Let dry replace cowling, Job Done.